Carpet Cleaning Tips for Long Lasting Carpet, Beach Areas, Newport Beach CA
Properly cleaned and maintained carpet will last twice as long. Learn the effective strategies for keeping your carpet looking new and fresh for years.
- Strategy #1: Banish dirt
- Strategy #2: Use a pro wisely
- Strategy #3: DIY right
- Strategy #4: Clean stains right—right away
Strategy #1: Banish dirt
1 of 3
Set the vacuum at the right height
If your vacuum is set too low, you can damage the carpet as well as the vacuum’s roller brush and drive belt. If it’s set too high, you won’t pick up any dirt. To set the vacuum’s ideal height, raise it to its highest setting, turn it on and lower it until you can feel the vacuum trying to tug itself forward.
Dirt is like thousands of little blades that cut carpet fibers. When you walk across a dirty carpet, you grind sharp dirt particles against the yarn, making tiny nicks in the fibers. All that fuzz mixed in with the dirt in your vacuum cleaner bags is your beautiful carpet headed out the door one bag at a time. When dirt scratches the fibers, it dulls the sheen, which is why high-traffic areas appear duller than the rest of the carpet. Over time, grinding dirt wears away the fibers too, which mats them down and makes them stain more easily. Follow these tips to keep your carpet as dirt-free as possible.
Vacuum oftenTo protect your carpet, vacuum entrance areas and high-traffic areas twice a week and the rest of the carpeting at least weekly. Oily soils attract oily soils, and frequent vacuuming will reduce soil buildup.
Start with a clean bag or filterA dirty bag, dirt cup or filter can cut a vacuum’s suction power in half. The main reason bagless vacuums stop working is that the filters aren’t changed often enough. Replace or wash (if possible) the filters on bagless vacuums every three months. Replace vacuum bags when they’re three-quarters full.
Vacuum at the right speedVacuum slowly enough to get out as much dirt as possible. Make one quick pass over low-traffic areas and two slow passes over high-traffic areas. Two slow passes removes ground-in dirt more effectively than several fast passes.
Use walk-off matsUse walk-off mats inside and out to keep dirt off the carpeting. Coarse-textured mats outside your doors remove soil. Water-absorbent mats inside prevent wet shoes on the carpeting.
Strategy #2: Use a pro wisely
1 of 4
Four ways to recognize quality pros: 1. Truck mounted equipment
Truck-mounted equipment is a better choice than portable steam cleaning equipment because it exhausts the dirty air and humidity outside. Its stronger suction leaves carpets drier, too.
Most carpet manufacturers recommend professional hot water extraction as the primary cleaning method for synthetic carpets. Although it’s often referred to as “steam” cleaning, there’s no steam involved. The carpet is pretreated with a detergent solution, and then a very hot rinse solution under high pressure is forced into your carpet and vacuumed out. When done correctly, this process cleans deep and doesn’t leave behind a soap residue. Quality pros charge $300 to $500 to deep clean 1,000 sq. ft. of carpet. At that price, you might be tempted to skip professional cleanings altogether and just rent a machine to clean the carpet yourself. Don’t. Or at least don’t do only that. A rented or purchased carpet-cleaning machine will remove the surface dirt. But deep cleaning to remove allergens, dust and greasy residues requires the specialized equipment and training of a pro. The best strategy is to use our DIY cleaning tips most of the time and hire a professional every 12 to 18 months.
Don’t take bids over the phoneQuality pros will provide references, an in-home inspection and a written estimate based on the square footage, type and condition of the carpeting rather than the number of rooms cleaned, and a written guarantee of their work.
Beware of “discount” carpet cleanersDiscount pros depend on making volume sales rather than establishing ongoing client relationships. They typically spray soap on your carpet, suck up the water and are gone in 30 minutes. These services leave behind a soap residue that will actually attract dirt to your carpet. Those “three rooms for 50 bucks” offers also get them into your house so they can sell you high-priced add-ons like spot removal and deodorizers—services that quality pros include for free.
You get what you pay forQuality pros charge according to the type of carpeting, the services you need and the size of the job. The entire process can take one to three hours.
Strategy #3: DIY right
1 of 3
Use DIY machines carefully
Hurrying through a cleaning will leave soap residue, a soaked carpet and a pad that can mold or mildew. Larger rental machines require you to pull them across the floor rather than push.
Carpet pros do a more thorough job than you can, but hiring a pro is expensive. So the next-best approach is to alternate between DIY and pro cleanings. DIY “steam”-cleaning machines can be effective if you understand how to use them and take the time to clean your carpet carefully.
You can rent a steam cleaner from a grocery store or home center. If you pick the machine up late in the day, many stores will charge you a half-day rate and let you keep the machine until the next morning. The detergent cost is additional. Typically you should use a tablespoon or less per gallon of water.
If you prefer to buy a steam-cleaning machine, plan to spend $60 to $300 or more. The pricier models have more powerful water jets and suction, and some even have a heating element to keep the water hot. The reviews on these machines are mixed, and some are prone to breakdowns. Do some online research (type “carpet cleaning machines” into your browser) before you buy.
Most rental machines weigh more, hold more water and come with a wider wand than purchased models, making them useful for larger, high-traffic areas. Purchased models are usually smaller, more portable and easier to store. They’re good for spot cleaning and are easier to drag up and down stairs. Whether you rent or buy, avoid damaging your carpets and make your cleaning last longer by following our tips.
Clean the carpet before it becomes really dirtyHow often your carpet needs cleaning depends on the kind of carpet traffic you have (think kids and pets). Clean the carpet when the color starts looking dull. If you wait until the carpet is filthy, cleaning it will be much more difficult, take much longer and cost more.
Vacuum well before and after cleaningVacuum beforehand to remove large particles of soil. Vacuum again after you clean and the carpet is completely dry to pick up soil that wicks to the surface during drying.
Pretreat stains and high-traffic areasMix a drop of detergent with hot water in a spray bottle and lightly mist the dirtiest areas. Let sit 5 to 10 minutes before starting the general cleaning.
Remove or elevate furnitureIf your furniture is too heavy to move, put aluminum foil squares, wood blocks or plastic film under and around the legs of all furniture to prevent rust from metal casters or stains from paint and finishes from transferring to damp carpet.
Don’t overwet the carpetDIY machines put a lot of moisture into the carpet, and most don’t have strong enough suction to extract it thoroughly. Make only one pass with the soap and water solution. Make one pass with the neutralizing rinse solution. Then make two or three drying passes with the water off.
Let it dry thoroughlyWet carpet is a perfect environment for mold and mildew. After you clean your carpets, open the windows, use fans and a dehumidifier, or put the AC on a moderate setting (72 to 78 degrees) to remove excess moisture from the air. Don’t replace the furniture or walk on the carpet until it’s completely dry. This can take up to 12 hours, though six to eight hours is typical.
Strategy #4: Clean stains right—right away
1 of 2
Don’t dig or scoop food spills
Digging or scooping can work the stain into the carpet. If there are solids on top of the stain, use a spoon or dull knife to carefully scrape the food toward the middle of the spill and into a white towel and then treat the stain.
Act quicklyIf you get to a stain immediately, there’s a 99 percent chance you can remove it. The longer a stain reacts chemically with the carpeting, the harder it is to remove.
Try water firstEighty percent of stains can be removed using plain tap water. To remove a stain, press a clean, dry, white cloth over the stain to absorb the spill. Repeat until the spill is absorbed. Then gently work water into the stain with a damp white towel and blot until the stain is gone. Change cloths when necessary. For a particularly stubborn spot, go to the online “spot solver” resource at The Carpet and Rug Institute (the carpet manufacturers’ trade organization) to find your stain and a suggested solution. Use a fan to dry the area if it’s very wet.
Blot—don’t rub or scrubScrubbing a stain will damage the fibers and create a fuzzy area. Always blot from the outer edge toward the center of the stain to avoid spreading the spot and creating a larger problem.
Be patientWork water gently into the spill and then blot with a dry cloth. Repeat until the stain is gone and all the water has been absorbed. If you’re patient, you’ll almost always be able to remove the stain.
On tough spots, try vinegar or club soda If water alone doesn’t remove a stain, try a white vinegar and water solution (equal amounts) or club soda before trying stronger commercial cleaning products.
Test commercial products firstSome products can cause carpet to get dirty faster or damage the carpet’s color and texture. For a list of carpet manufacturer- approved spot and stain cleaners, go online to The Carpet and Rug Institute. Test carpet-cleaning products on an inconspicuous area before using.
Pacific Guarantee
At Pacific Carpet Cleaning we are committed to your satisfaction. Our certified carpet cleaning technicians receive continued training in cutting edge technologies. Standard and Premium Service come with a 30-day guarantee and Economy service comes with a 10-day guarantee. Call today to receive a free quote or Get an Online Quote Now